shoebill-test/charts/postgresql-postgresql-server

Bitnami package for PostgreSQL

PostgreSQL (Postgres) is an open source object-relational database known for reliability and data integrity. ACID-compliant, it supports foreign keys, joins, views, triggers and stored procedures.

Overview of PostgreSQL

Trademarks: This software listing is packaged by Bitnami. The respective trademarks mentioned in the offering are owned by the respective companies, and use of them does not imply any affiliation or endorsement.

TL;DR

helm install my-release oci://registry-1.docker.io/bitnamicharts/postgresql

Looking to use PostgreSQL in production? Try VMware Tanzu Application Catalog, the commercial edition of the Bitnami catalog.

Introduction

This chart bootstraps a PostgreSQL deployment on a Kubernetes cluster using the Helm package manager.

For HA, please see this repo

Bitnami charts can be used with Kubeapps for deployment and management of Helm Charts in clusters.

Prerequisites

• Kubernetes 1.23+
• Helm 3.8.0+
• PV provisioner support in the underlying infrastructure

Installing the Chart

To install the chart with the release name my-release:

helm install my-release oci://REGISTRY_NAME/REPOSITORY_NAME/postgresql

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The command deploys PostgreSQL on the Kubernetes cluster in the default configuration. The Parameters section lists the parameters that can be configured during installation.

Tip

: List all releases using helm list

Configuration and installation details

Resource requests and limits

Bitnami charts allow setting resource requests and limits for all containers inside the chart deployment. These are inside the resources value (check parameter table). Setting requests is essential for production workloads and these should be adapted to your specific use case.

To make this process easier, the chart contains the resourcesPreset values, which automatically sets the resources section according to different presets. Check these presets in the bitnami/common chart. However, in production workloads using resourcePreset is discouraged as it may not fully adapt to your specific needs. Find more information on container resource management in the official Kubernetes documentation.

Rolling VS Immutable tags

It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.

Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.

Customizing primary and read replica services in a replicated configuration

At the top level, there is a service object which defines the services for both primary and readReplicas. For deeper customization, there are service objects for both the primary and read types individually. This allows you to override the values in the top level service object so that the primary and read can be of different service types and with different clusterIPs / nodePorts. Also in the case you want the primary and read to be of type nodePort, you will need to set the nodePorts to different values to prevent a collision. The values that are deeper in the primary.service or readReplicas.service objects will take precedence over the top level service object.

Use a different PostgreSQL version

To modify the application version used in this chart, specify a different version of the image using the image.tag parameter and/or a different repository using the image.repository parameter.

LDAP

LDAP support can be enabled in the chart by specifying the ldap. parameters while creating a release. The following parameters should be configured to properly enable the LDAP support in the chart.

• ldap.enabled: Enable LDAP support. Defaults to false.
• ldap.uri: LDAP URL beginning in the form ldap[s]://<hostname>:<port>. No defaults.
• ldap.base: LDAP base DN. No defaults.
• ldap.binddn: LDAP bind DN. No defaults.
• ldap.bindpw: LDAP bind password. No defaults.
• ldap.bslookup: LDAP base lookup. No defaults.
• ldap.nss_initgroups_ignoreusers: LDAP ignored users. root,nslcd.
• ldap.scope: LDAP search scope. No defaults.
• ldap.tls_reqcert: LDAP TLS check on server certificates. No defaults.

For example:

ldap.enabled="true"
ldap.uri="ldap://my_ldap_server"
ldap.base="dc=example\,dc=org"
ldap.binddn="cn=admin\,dc=example\,dc=org"
ldap.bindpw="admin"
ldap.bslookup="ou=group-ok\,dc=example\,dc=org"
ldap.nss_initgroups_ignoreusers="root\,nslcd"
ldap.scope="sub"
ldap.tls_reqcert="demand"

Next, login to the PostgreSQL server using the psql client and add the PAM authenticated LDAP users.

Note: Parameters including commas must be escaped as shown in the above example.

postgresql.conf / pg_hba.conf files as configMap

This helm chart also supports to customize the PostgreSQL configuration file. You can add additional PostgreSQL configuration parameters using the primary.extendedConfiguration/readReplicas.extendedConfiguration parameters as a string. Alternatively, to replace the entire default configuration use primary.configuration.

You can also add a custom pg_hba.conf using the primary.pgHbaConfiguration parameter.

In addition to these options, you can also set an external ConfigMap with all the configuration files. This is done by setting the primary.existingConfigmap parameter. Note that this will override the two previous options.

Initialize a fresh instance

The Bitnami PostgreSQL image allows you to use your custom scripts to initialize a fresh instance. In order to execute the scripts, you can specify custom scripts using the primary.initdb.scripts parameter as a string.

In addition, you can also set an external ConfigMap with all the initialization scripts. This is done by setting the primary.initdb.scriptsConfigMap parameter. Note that this will override the two previous options. If your initialization scripts contain sensitive information such as credentials or passwords, you can use the primary.initdb.scriptsSecret parameter.

The allowed extensions are .sh, .sql and .sql.gz.

Securing traffic using TLS

TLS support can be enabled in the chart by specifying the tls. parameters while creating a release. The following parameters should be configured to properly enable the TLS support in the chart:

• tls.enabled: Enable TLS support. Defaults to false
• tls.certificatesSecret: Name of an existing secret that contains the certificates. No defaults.
• tls.certFilename: Certificate filename. No defaults.
• tls.certKeyFilename: Certificate key filename. No defaults.

For example:

• First, create the secret with the cetificates files:

  kubectl create secret generic certificates-tls-secret --from-file=./cert.crt --from-file=./cert.key --from-file=./ca.crt
  

• Then, use the following parameters:

  volumePermissions.enabled=true
  tls.enabled=true
  tls.certificatesSecret="certificates-tls-secret"
  tls.certFilename="cert.crt"
  tls.certKeyFilename="cert.key"
  

  Note TLS and VolumePermissions: PostgreSQL requires certain permissions on sensitive files (such as certificate keys) to start up. Due to an on-going issue regarding kubernetes permissions and the use of containerSecurityContext.runAsUser, you must enable volumePermissions to ensure everything works as expected.

Sidecars

If you need additional containers to run within the same pod as PostgreSQL (e.g. an additional metrics or logging exporter), you can do so via the sidecars config parameter. Simply define your container according to the Kubernetes container spec.

# For the PostgreSQL primary
primary:
  sidecars:
  - name: your-image-name
    image: your-image
    imagePullPolicy: Always
    ports:
    - name: portname
     containerPort: 1234
# For the PostgreSQL replicas
readReplicas:
  sidecars:
  - name: your-image-name
    image: your-image
    imagePullPolicy: Always
    ports:
    - name: portname
     containerPort: 1234

Metrics

The chart optionally can start a metrics exporter for prometheus. The metrics endpoint (port 9187) is not exposed and it is expected that the metrics are collected from inside the k8s cluster using something similar as the described in the example Prometheus scrape configuration.

The exporter allows to create custom metrics from additional SQL queries. See the Chart's values.yaml for an example and consult the exporters documentation for more details.

Use of global variables

In more complex scenarios, we may have the following tree of dependencies

                     +--------------+
                     |              |
        +------------+   Chart 1    +-----------+
        |            |              |           |
        |            --------+------+           |
        |                    |                  |
        |                    |                  |
        |                    |                  |
        |                    |                  |
        v                    v                  v
+-------+------+    +--------+------+  +--------+------+
|              |    |               |  |               |
|  PostgreSQL  |    |  Sub-chart 1  |  |  Sub-chart 2  |
|              |    |               |  |               |
+--------------+    +---------------+  +---------------+

The three charts below depend on the parent chart Chart 1. However, subcharts 1 and 2 may need to connect to PostgreSQL as well. In order to do so, subcharts 1 and 2 need to know the PostgreSQL credentials, so one option for deploying could be deploy Chart 1 with the following parameters:

postgresql.auth.username=testuser
subchart1.postgresql.auth.username=testuser
subchart2.postgresql.auth.username=testuser
postgresql.auth.password=testpass
subchart1.postgresql.auth.password=testpass
subchart2.postgresql.auth.password=testpass
postgresql.auth.database=testdb
subchart1.postgresql.auth.database=testdb
subchart2.postgresql.auth.database=testdb

If the number of dependent sub-charts increases, installing the chart with parameters can become increasingly difficult. An alternative would be to set the credentials using global variables as follows:

global.postgresql.auth.username=testuser
global.postgresql.auth.password=testpass
global.postgresql.auth.database=testdb

This way, the credentials will be available in all of the subcharts.

Backup and restore PostgreSQL deployments

To back up and restore Bitnami PostgreSQL Helm chart deployments on Kubernetes, you need to back up the persistent volumes from the source deployment and attach them to a new deployment using Velero, a Kubernetes backup/restore tool.

These are the steps you will usually follow to back up and restore your PostgreSQL cluster data:

• Install Velero on the source and destination clusters.
• Use Velero to back up the PersistentVolumes (PVs) used by the deployment on the source cluster.
• Use Velero to restore the backed-up PVs on the destination cluster.
• Create a new deployment on the destination cluster with the same chart, deployment name, credentials and other parameters as the original. This new deployment will use the restored PVs and hence the original data.

Refer to our detailed tutorial on backing up and restoring PostgreSQL deployments on Kubernetes for more information.

NetworkPolicy

To enable network policy for PostgreSQL, install a networking plugin that implements the Kubernetes NetworkPolicy spec, and set networkPolicy.enabled to true.

For Kubernetes v1.5 & v1.6, you must also turn on NetworkPolicy by setting the DefaultDeny namespace annotation. Note: this will enforce policy for all pods in the namespace:

kubectl annotate namespace default "net.beta.kubernetes.io/network-policy={\"ingress\":{\"isolation\":\"DefaultDeny\"}}"

With NetworkPolicy enabled, traffic will be limited to just port 5432.

For more precise policy, set networkPolicy.allowExternal=false. This will only allow pods with the generated client label to connect to PostgreSQL. This label will be displayed in the output of a successful install.

Differences between Bitnami PostgreSQL image and Docker Official image

• The Docker Official PostgreSQL image does not support replication. If you pass any replication environment variable, this would be ignored. The only environment variables supported by the Docker Official image are POSTGRES_USER, POSTGRES_DB, POSTGRES_PASSWORD, POSTGRES_INITDB_ARGS, POSTGRES_INITDB_WALDIR and PGDATA. All the remaining environment variables are specific to the Bitnami PostgreSQL image.
• The Bitnami PostgreSQL image is non-root by default. This requires that you run the pod with securityContext and updates the permissions of the volume with an initContainer. A key benefit of this configuration is that the pod follows security best practices and is prepared to run on Kubernetes distributions with hard security constraints like OpenShift.
• For OpenShift up to 4.10, let set the volume permissions, security context, runAsUser and fsGroup automatically by OpenShift and disable the predefined settings of the helm chart: primary.securityContext.enabled=false,primary.containerSecurityContext.enabled=false,volumePermissions.enabled=false,shmVolume.enabled=false
• For OpenShift 4.11 and higher, let set OpenShift the runAsUser and fsGroup automatically. Configure the pod and container security context to restrictive defaults and disable the volume permissions setup: primary. podSecurityContext.fsGroup=null,primary.podSecurityContext.seccompProfile.type=RuntimeDefault,primary.containerSecurityContext.runAsUser=null,primary.containerSecurityContext.allowPrivilegeEscalation=false,primary.containerSecurityContext.runAsNonRoot=true,primary.containerSecurityContext.seccompProfile.type=RuntimeDefault,primary.containerSecurityContext.capabilities.drop=['ALL'],volumePermissions.enabled=false,shmVolume.enabled=false

Setting Pod's affinity

This chart allows you to set your custom affinity using the XXX.affinity parameter(s). Find more information about Pod's affinity in the kubernetes documentation.

As an alternative, you can use of the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the XXX.podAffinityPreset, XXX.podAntiAffinityPreset, or XXX.nodeAffinityPreset parameters.

Persistence

The Bitnami PostgreSQL image stores the PostgreSQL data and configurations at the /bitnami/postgresql path of the container.

Persistent Volume Claims are used to keep the data across deployments. This is known to work in GCE, AWS, and minikube. See the Parameters section to configure the PVC or to disable persistence.

If you already have data in it, you will fail to sync to standby nodes for all commits, details can refer to the code present in the container repository. If you need to use those data, please covert them to sql and import after helm install finished.

Parameters

Global parameters

Name	Description	Value
global.imageRegistry	Global Docker image registry	""
global.imagePullSecrets	Global Docker registry secret names as an array	[]
global.defaultStorageClass	Global default StorageClass for Persistent Volume(s)	""
global.storageClass	DEPRECATED: use global.defaultStorageClass instead	""
global.postgresql.auth.postgresPassword	Password for the "postgres" admin user (overrides auth.postgresPassword)	""
global.postgresql.auth.username	Name for a custom user to create (overrides auth.username)	""
global.postgresql.auth.password	Password for the custom user to create (overrides auth.password)	""
global.postgresql.auth.database	Name for a custom database to create (overrides auth.database)	""
global.postgresql.auth.existingSecret	Name of existing secret to use for PostgreSQL credentials (overrides auth.existingSecret).	""
global.postgresql.auth.secretKeys.adminPasswordKey	Name of key in existing secret to use for PostgreSQL credentials (overrides auth.secretKeys.adminPasswordKey). Only used when global.postgresql.auth.existingSecret is set.	""
global.postgresql.auth.secretKeys.userPasswordKey	Name of key in existing secret to use for PostgreSQL credentials (overrides auth.secretKeys.userPasswordKey). Only used when global.postgresql.auth.existingSecret is set.	""
global.postgresql.auth.secretKeys.replicationPasswordKey	Name of key in existing secret to use for PostgreSQL credentials (overrides auth.secretKeys.replicationPasswordKey). Only used when global.postgresql.auth.existingSecret is set.	""
global.postgresql.service.ports.postgresql	PostgreSQL service port (overrides service.ports.postgresql)	""
global.compatibility.openshift.adaptSecurityContext	Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)	auto

Common parameters

Name	Description	Value
kubeVersion	Override Kubernetes version	""
nameOverride	String to partially override common.names.fullname template (will maintain the release name)	""
fullnameOverride	String to fully override common.names.fullname template	""
clusterDomain	Kubernetes Cluster Domain	cluster.local
extraDeploy	Array of extra objects to deploy with the release (evaluated as a template)	[]
commonLabels	Add labels to all the deployed resources	{}
commonAnnotations	Add annotations to all the deployed resources	{}
diagnosticMode.enabled	Enable diagnostic mode (all probes will be disabled and the command will be overridden)	false
diagnosticMode.command	Command to override all containers in the statefulset	["sleep"]
diagnosticMode.args	Args to override all containers in the statefulset	["infinity"]

PostgreSQL common parameters

Name	Description	Value
image.registry	PostgreSQL image registry	REGISTRY_NAME
image.repository	PostgreSQL image repository	REPOSITORY_NAME/postgresql
image.digest	PostgreSQL image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag	""
image.pullPolicy	PostgreSQL image pull policy	IfNotPresent
image.pullSecrets	Specify image pull secrets	[]
image.debug	Specify if debug values should be set	false
auth.enablePostgresUser	Assign a password to the "postgres" admin user. Otherwise, remote access will be blocked for this user	true
auth.postgresPassword	Password for the "postgres" admin user. Ignored if auth.existingSecret is provided	""
auth.username	Name for a custom user to create	""
auth.password	Password for the custom user to create. Ignored if auth.existingSecret is provided	""
auth.database	Name for a custom database to create	""
auth.replicationUsername	Name of the replication user	repl_user
auth.replicationPassword	Password for the replication user. Ignored if auth.existingSecret is provided	""
auth.existingSecret	Name of existing secret to use for PostgreSQL credentials. auth.postgresPassword, auth.password, and auth.replicationPassword will be ignored and picked up from this secret. The secret might also contains the key ldap-password if LDAP is enabled. ldap.bind_password will be ignored and picked from this secret in this case.	""
auth.secretKeys.adminPasswordKey	Name of key in existing secret to use for PostgreSQL credentials. Only used when auth.existingSecret is set.	postgres-password
auth.secretKeys.userPasswordKey	Name of key in existing secret to use for PostgreSQL credentials. Only used when auth.existingSecret is set.	password
auth.secretKeys.replicationPasswordKey	Name of key in existing secret to use for PostgreSQL credentials. Only used when auth.existingSecret is set.	replication-password
auth.usePasswordFiles	Mount credentials as a files instead of using an environment variable	false
architecture	PostgreSQL architecture (standalone or replication)	standalone
replication.synchronousCommit	Set synchronous commit mode. Allowed values: on, remote_apply, remote_write, local and off	off
replication.numSynchronousReplicas	Number of replicas that will have synchronous replication. Note: Cannot be greater than readReplicas.replicaCount.	0
replication.applicationName	Cluster application name. Useful for advanced replication settings	my_application
containerPorts.postgresql	PostgreSQL container port	5432
audit.logHostname	Log client hostnames	false
audit.logConnections	Add client log-in operations to the log file	false
audit.logDisconnections	Add client log-outs operations to the log file	false
audit.pgAuditLog	Add operations to log using the pgAudit extension	""
audit.pgAuditLogCatalog	Log catalog using pgAudit	off
audit.clientMinMessages	Message log level to share with the user	error
audit.logLinePrefix	Template for log line prefix (default if not set)	""
audit.logTimezone	Timezone for the log timestamps	""
ldap.enabled	Enable LDAP support	false
ldap.server	IP address or name of the LDAP server.	""
ldap.port	Port number on the LDAP server to connect to	""
ldap.prefix	String to prepend to the user name when forming the DN to bind	""
ldap.suffix	String to append to the user name when forming the DN to bind	""
ldap.basedn	Root DN to begin the search for the user in	""
ldap.binddn	DN of user to bind to LDAP	""
ldap.bindpw	Password for the user to bind to LDAP	""
ldap.searchAttribute	Attribute to match against the user name in the search	""
ldap.searchFilter	The search filter to use when doing search+bind authentication	""
ldap.scheme	Set to ldaps to use LDAPS	""
ldap.tls.enabled	Se to true to enable TLS encryption	false
ldap.uri	LDAP URL beginning in the form ldap[s]://host[:port]/basedn. If provided, all the other LDAP parameters will be ignored.	""
postgresqlDataDir	PostgreSQL data dir folder	/bitnami/postgresql/data
postgresqlSharedPreloadLibraries	Shared preload libraries (comma-separated list)	pgaudit
shmVolume.enabled	Enable emptyDir volume for /dev/shm for PostgreSQL pod(s)	true
shmVolume.sizeLimit	Set this to enable a size limit on the shm tmpfs	""
tls.enabled	Enable TLS traffic support	false
tls.autoGenerated	Generate automatically self-signed TLS certificates	false
tls.preferServerCiphers	Whether to use the server's TLS cipher preferences rather than the client's	true
tls.certificatesSecret	Name of an existing secret that contains the certificates	""
tls.certFilename	Certificate filename	""
tls.certKeyFilename	Certificate key filename	""
tls.certCAFilename	CA Certificate filename	""
tls.crlFilename	File containing a Certificate Revocation List	""

PostgreSQL Primary parameters

Name	Description	Value
primary.name	Name of the primary database (eg primary, master, leader, ...)	primary
primary.configuration	PostgreSQL Primary main configuration to be injected as ConfigMap	""
primary.pgHbaConfiguration	PostgreSQL Primary client authentication configuration	""
primary.existingConfigmap	Name of an existing ConfigMap with PostgreSQL Primary configuration	""
primary.extendedConfiguration	Extended PostgreSQL Primary configuration (appended to main or default configuration)	""
primary.existingExtendedConfigmap	Name of an existing ConfigMap with PostgreSQL Primary extended configuration	""
primary.initdb.args	PostgreSQL initdb extra arguments	""
primary.initdb.postgresqlWalDir	Specify a custom location for the PostgreSQL transaction log	""
primary.initdb.scripts	Dictionary of initdb scripts	{}
primary.initdb.scriptsConfigMap	ConfigMap with scripts to be run at first boot	""
primary.initdb.scriptsSecret	Secret with scripts to be run at first boot (in case it contains sensitive information)	""
primary.initdb.user	Specify the PostgreSQL username to execute the initdb scripts	""
primary.initdb.password	Specify the PostgreSQL password to execute the initdb scripts	""
primary.preInitDb.scripts	Dictionary of pre-init scripts	{}
primary.preInitDb.scriptsConfigMap	ConfigMap with pre-init scripts to be run	""
primary.preInitDb.scriptsSecret	Secret with pre-init scripts to be run	""
primary.standby.enabled	Whether to enable current cluster's primary as standby server of another cluster or not	false
primary.standby.primaryHost	The Host of replication primary in the other cluster	""
primary.standby.primaryPort	The Port of replication primary in the other cluster	""
primary.extraEnvVars	Array with extra environment variables to add to PostgreSQL Primary nodes	[]
primary.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for PostgreSQL Primary nodes	""
primary.extraEnvVarsSecret	Name of existing Secret containing extra env vars for PostgreSQL Primary nodes	""
primary.command	Override default container command (useful when using custom images)	[]
primary.args	Override default container args (useful when using custom images)	[]
primary.livenessProbe.enabled	Enable livenessProbe on PostgreSQL Primary containers	true
primary.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
primary.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
primary.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
primary.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
primary.livenessProbe.successThreshold	Success threshold for livenessProbe	1
primary.readinessProbe.enabled	Enable readinessProbe on PostgreSQL Primary containers	true
primary.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
primary.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
primary.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
primary.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
primary.readinessProbe.successThreshold	Success threshold for readinessProbe	1
primary.startupProbe.enabled	Enable startupProbe on PostgreSQL Primary containers	false
primary.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	30
primary.startupProbe.periodSeconds	Period seconds for startupProbe	10
primary.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
primary.startupProbe.failureThreshold	Failure threshold for startupProbe	15
primary.startupProbe.successThreshold	Success threshold for startupProbe	1
primary.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
primary.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
primary.customStartupProbe	Custom startupProbe that overrides the default one	{}
primary.lifecycleHooks	for the PostgreSQL Primary container to automate configuration before or after startup	{}
primary.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if primary.resources is set (primary.resources is recommended for production).	nano
primary.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
primary.podSecurityContext.enabled	Enable security context	true
primary.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
primary.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
primary.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
primary.podSecurityContext.fsGroup	Group ID for the pod	1001
primary.containerSecurityContext.enabled	Enabled containers' Security Context	true
primary.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
primary.containerSecurityContext.runAsUser	Set containers' Security Context runAsUser	1001
primary.containerSecurityContext.runAsGroup	Set containers' Security Context runAsGroup	1001
primary.containerSecurityContext.runAsNonRoot	Set container's Security Context runAsNonRoot	true
primary.containerSecurityContext.privileged	Set container's Security Context privileged	false
primary.containerSecurityContext.readOnlyRootFilesystem	Set container's Security Context readOnlyRootFilesystem	true
primary.containerSecurityContext.allowPrivilegeEscalation	Set container's Security Context allowPrivilegeEscalation	false
primary.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
primary.containerSecurityContext.seccompProfile.type	Set container's Security Context seccomp profile	RuntimeDefault
primary.automountServiceAccountToken	Mount Service Account token in pod	false
primary.hostAliases	PostgreSQL primary pods host aliases	[]
primary.hostNetwork	Specify if host network should be enabled for PostgreSQL pod (postgresql primary)	false
primary.hostIPC	Specify if host IPC should be enabled for PostgreSQL pod (postgresql primary)	false
primary.labels	Map of labels to add to the statefulset (postgresql primary)	{}
primary.annotations	Annotations for PostgreSQL primary pods	{}
primary.podLabels	Map of labels to add to the pods (postgresql primary)	{}
primary.podAnnotations	Map of annotations to add to the pods (postgresql primary)	{}
primary.podAffinityPreset	PostgreSQL primary pod affinity preset. Ignored if primary.affinity is set. Allowed values: soft or hard	""
primary.podAntiAffinityPreset	PostgreSQL primary pod anti-affinity preset. Ignored if primary.affinity is set. Allowed values: soft or hard	soft
primary.nodeAffinityPreset.type	PostgreSQL primary node affinity preset type. Ignored if primary.affinity is set. Allowed values: soft or hard	""
primary.nodeAffinityPreset.key	PostgreSQL primary node label key to match Ignored if primary.affinity is set.	""
primary.nodeAffinityPreset.values	PostgreSQL primary node label values to match. Ignored if primary.affinity is set.	[]
primary.affinity	Affinity for PostgreSQL primary pods assignment	{}
primary.nodeSelector	Node labels for PostgreSQL primary pods assignment	{}
primary.tolerations	Tolerations for PostgreSQL primary pods assignment	[]
primary.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
primary.priorityClassName	Priority Class to use for each pod (postgresql primary)	""
primary.schedulerName	Use an alternate scheduler, e.g. "stork".	""
primary.terminationGracePeriodSeconds	Seconds PostgreSQL primary pod needs to terminate gracefully	""
primary.updateStrategy.type	PostgreSQL Primary statefulset strategy type	RollingUpdate
primary.updateStrategy.rollingUpdate	PostgreSQL Primary statefulset rolling update configuration parameters	{}
primary.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the PostgreSQL Primary container(s)	[]
primary.extraVolumes	Optionally specify extra list of additional volumes for the PostgreSQL Primary pod(s)	[]
primary.sidecars	Add additional sidecar containers to the PostgreSQL Primary pod(s)	[]
primary.initContainers	Add additional init containers to the PostgreSQL Primary pod(s)	[]
primary.pdb.create	Enable/disable a Pod Disruption Budget creation	true
primary.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
primary.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both primary.pdb.minAvailable and primary.pdb.maxUnavailable are empty.	""
primary.extraPodSpec	Optionally specify extra PodSpec for the PostgreSQL Primary pod(s)	{}
primary.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
primary.networkPolicy.allowExternal	Don't require server label for connections	true
primary.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
primary.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
primary.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
primary.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
primary.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
primary.service.type	Kubernetes Service type	ClusterIP
primary.service.ports.postgresql	PostgreSQL service port	5432
primary.service.nodePorts.postgresql	Node port for PostgreSQL	""
primary.service.clusterIP	Static clusterIP or None for headless services	""
primary.service.annotations	Annotations for PostgreSQL primary service	{}
primary.service.loadBalancerClass	Load balancer class if service type is LoadBalancer	""
primary.service.loadBalancerIP	Load balancer IP if service type is LoadBalancer	""
primary.service.externalTrafficPolicy	Enable client source IP preservation	Cluster
primary.service.loadBalancerSourceRanges	Addresses that are allowed when service is LoadBalancer	[]
primary.service.extraPorts	Extra ports to expose in the PostgreSQL primary service	[]
primary.service.sessionAffinity	Session Affinity for Kubernetes service, can be "None" or "ClientIP"	None
primary.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
primary.service.headless.annotations	Additional custom annotations for headless PostgreSQL primary service	{}
primary.persistence.enabled	Enable PostgreSQL Primary data persistence using PVC	true
primary.persistence.volumeName	Name to assign the volume	data
primary.persistence.existingClaim	Name of an existing PVC to use	""
primary.persistence.mountPath	The path the volume will be mounted at	/bitnami/postgresql
primary.persistence.subPath	The subdirectory of the volume to mount to	""
primary.persistence.storageClass	PVC Storage Class for PostgreSQL Primary data volume	""
primary.persistence.accessModes	PVC Access Mode for PostgreSQL volume	["ReadWriteOnce"]
primary.persistence.size	PVC Storage Request for PostgreSQL volume	8Gi
primary.persistence.annotations	Annotations for the PVC	{}
primary.persistence.labels	Labels for the PVC	{}
primary.persistence.selector	Selector to match an existing Persistent Volume (this value is evaluated as a template)	{}
primary.persistence.dataSource	Custom PVC data source	{}
primary.persistentVolumeClaimRetentionPolicy.enabled	Enable Persistent volume retention policy for Primary Statefulset	false
primary.persistentVolumeClaimRetentionPolicy.whenScaled	Volume retention behavior when the replica count of the StatefulSet is reduced	Retain
primary.persistentVolumeClaimRetentionPolicy.whenDeleted	Volume retention behavior that applies when the StatefulSet is deleted	Retain

PostgreSQL read only replica parameters (only used when architecture is set to replication)

Name	Description	Value
readReplicas.name	Name of the read replicas database (eg secondary, slave, ...)	read
readReplicas.replicaCount	Number of PostgreSQL read only replicas	1
readReplicas.extendedConfiguration	Extended PostgreSQL read only replicas configuration (appended to main or default configuration)	""
readReplicas.extraEnvVars	Array with extra environment variables to add to PostgreSQL read only nodes	[]
readReplicas.extraEnvVarsCM	Name of existing ConfigMap containing extra env vars for PostgreSQL read only nodes	""
readReplicas.extraEnvVarsSecret	Name of existing Secret containing extra env vars for PostgreSQL read only nodes	""
readReplicas.command	Override default container command (useful when using custom images)	[]
readReplicas.args	Override default container args (useful when using custom images)	[]
readReplicas.livenessProbe.enabled	Enable livenessProbe on PostgreSQL read only containers	true
readReplicas.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	30
readReplicas.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
readReplicas.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
readReplicas.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
readReplicas.livenessProbe.successThreshold	Success threshold for livenessProbe	1
readReplicas.readinessProbe.enabled	Enable readinessProbe on PostgreSQL read only containers	true
readReplicas.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
readReplicas.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
readReplicas.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
readReplicas.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
readReplicas.readinessProbe.successThreshold	Success threshold for readinessProbe	1
readReplicas.startupProbe.enabled	Enable startupProbe on PostgreSQL read only containers	false
readReplicas.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	30
readReplicas.startupProbe.periodSeconds	Period seconds for startupProbe	10
readReplicas.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
readReplicas.startupProbe.failureThreshold	Failure threshold for startupProbe	15
readReplicas.startupProbe.successThreshold	Success threshold for startupProbe	1
readReplicas.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
readReplicas.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
readReplicas.customStartupProbe	Custom startupProbe that overrides the default one	{}
readReplicas.lifecycleHooks	for the PostgreSQL read only container to automate configuration before or after startup	{}
readReplicas.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if readReplicas.resources is set (readReplicas.resources is recommended for production).	nano
readReplicas.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
readReplicas.podSecurityContext.enabled	Enable security context	true
readReplicas.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
readReplicas.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
readReplicas.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
readReplicas.podSecurityContext.fsGroup	Group ID for the pod	1001
readReplicas.containerSecurityContext.enabled	Enabled containers' Security Context	true
readReplicas.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
readReplicas.containerSecurityContext.runAsUser	Set containers' Security Context runAsUser	1001
readReplicas.containerSecurityContext.runAsGroup	Set containers' Security Context runAsGroup	1001
readReplicas.containerSecurityContext.runAsNonRoot	Set container's Security Context runAsNonRoot	true
readReplicas.containerSecurityContext.privileged	Set container's Security Context privileged	false
readReplicas.containerSecurityContext.readOnlyRootFilesystem	Set container's Security Context readOnlyRootFilesystem	true
readReplicas.containerSecurityContext.allowPrivilegeEscalation	Set container's Security Context allowPrivilegeEscalation	false
readReplicas.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
readReplicas.containerSecurityContext.seccompProfile.type	Set container's Security Context seccomp profile	RuntimeDefault
readReplicas.automountServiceAccountToken	Mount Service Account token in pod	false
readReplicas.hostAliases	PostgreSQL read only pods host aliases	[]
readReplicas.hostNetwork	Specify if host network should be enabled for PostgreSQL pod (PostgreSQL read only)	false
readReplicas.hostIPC	Specify if host IPC should be enabled for PostgreSQL pod (postgresql primary)	false
readReplicas.labels	Map of labels to add to the statefulset (PostgreSQL read only)	{}
readReplicas.annotations	Annotations for PostgreSQL read only pods	{}
readReplicas.podLabels	Map of labels to add to the pods (PostgreSQL read only)	{}
readReplicas.podAnnotations	Map of annotations to add to the pods (PostgreSQL read only)	{}
readReplicas.podAffinityPreset	PostgreSQL read only pod affinity preset. Ignored if primary.affinity is set. Allowed values: soft or hard	""
readReplicas.podAntiAffinityPreset	PostgreSQL read only pod anti-affinity preset. Ignored if primary.affinity is set. Allowed values: soft or hard	soft
readReplicas.nodeAffinityPreset.type	PostgreSQL read only node affinity preset type. Ignored if primary.affinity is set. Allowed values: soft or hard	""
readReplicas.nodeAffinityPreset.key	PostgreSQL read only node label key to match Ignored if primary.affinity is set.	""
readReplicas.nodeAffinityPreset.values	PostgreSQL read only node label values to match. Ignored if primary.affinity is set.	[]
readReplicas.affinity	Affinity for PostgreSQL read only pods assignment	{}
readReplicas.nodeSelector	Node labels for PostgreSQL read only pods assignment	{}
readReplicas.tolerations	Tolerations for PostgreSQL read only pods assignment	[]
readReplicas.topologySpreadConstraints	Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template	[]
readReplicas.priorityClassName	Priority Class to use for each pod (PostgreSQL read only)	""
readReplicas.schedulerName	Use an alternate scheduler, e.g. "stork".	""
readReplicas.terminationGracePeriodSeconds	Seconds PostgreSQL read only pod needs to terminate gracefully	""
readReplicas.updateStrategy.type	PostgreSQL read only statefulset strategy type	RollingUpdate
readReplicas.updateStrategy.rollingUpdate	PostgreSQL read only statefulset rolling update configuration parameters	{}
readReplicas.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the PostgreSQL read only container(s)	[]
readReplicas.extraVolumes	Optionally specify extra list of additional volumes for the PostgreSQL read only pod(s)	[]
readReplicas.sidecars	Add additional sidecar containers to the PostgreSQL read only pod(s)	[]
readReplicas.initContainers	Add additional init containers to the PostgreSQL read only pod(s)	[]
readReplicas.pdb.create	Enable/disable a Pod Disruption Budget creation	true
readReplicas.pdb.minAvailable	Minimum number/percentage of pods that should remain scheduled	""
readReplicas.pdb.maxUnavailable	Maximum number/percentage of pods that may be made unavailable. Defaults to 1 if both readReplicas.pdb.minAvailable and readReplicas.pdb.maxUnavailable are empty.	""
readReplicas.extraPodSpec	Optionally specify extra PodSpec for the PostgreSQL read only pod(s)	{}
readReplicas.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
readReplicas.networkPolicy.allowExternal	Don't require server label for connections	true
readReplicas.networkPolicy.allowExternalEgress	Allow the pod to access any range of port and all destinations.	true
readReplicas.networkPolicy.extraIngress	Add extra ingress rules to the NetworkPolicy	[]
readReplicas.networkPolicy.extraEgress	Add extra ingress rules to the NetworkPolicy	[]
readReplicas.networkPolicy.ingressNSMatchLabels	Labels to match to allow traffic from other namespaces	{}
readReplicas.networkPolicy.ingressNSPodMatchLabels	Pod labels to match to allow traffic from other namespaces	{}
readReplicas.service.type	Kubernetes Service type	ClusterIP
readReplicas.service.ports.postgresql	PostgreSQL service port	5432
readReplicas.service.nodePorts.postgresql	Node port for PostgreSQL	""
readReplicas.service.clusterIP	Static clusterIP or None for headless services	""
readReplicas.service.annotations	Annotations for PostgreSQL read only service	{}
readReplicas.service.loadBalancerClass	Load balancer class if service type is LoadBalancer	""
readReplicas.service.loadBalancerIP	Load balancer IP if service type is LoadBalancer	""
readReplicas.service.externalTrafficPolicy	Enable client source IP preservation	Cluster
readReplicas.service.loadBalancerSourceRanges	Addresses that are allowed when service is LoadBalancer	[]
readReplicas.service.extraPorts	Extra ports to expose in the PostgreSQL read only service	[]
readReplicas.service.sessionAffinity	Session Affinity for Kubernetes service, can be "None" or "ClientIP"	None
readReplicas.service.sessionAffinityConfig	Additional settings for the sessionAffinity	{}
readReplicas.service.headless.annotations	Additional custom annotations for headless PostgreSQL read only service	{}
readReplicas.persistence.enabled	Enable PostgreSQL read only data persistence using PVC	true
readReplicas.persistence.existingClaim	Name of an existing PVC to use	""
readReplicas.persistence.mountPath	The path the volume will be mounted at	/bitnami/postgresql
readReplicas.persistence.subPath	The subdirectory of the volume to mount to	""
readReplicas.persistence.storageClass	PVC Storage Class for PostgreSQL read only data volume	""
readReplicas.persistence.accessModes	PVC Access Mode for PostgreSQL volume	["ReadWriteOnce"]
readReplicas.persistence.size	PVC Storage Request for PostgreSQL volume	8Gi
readReplicas.persistence.annotations	Annotations for the PVC	{}
readReplicas.persistence.labels	Labels for the PVC	{}
readReplicas.persistence.selector	Selector to match an existing Persistent Volume (this value is evaluated as a template)	{}
readReplicas.persistence.dataSource	Custom PVC data source	{}
readReplicas.persistentVolumeClaimRetentionPolicy.enabled	Enable Persistent volume retention policy for read only Statefulset	false
readReplicas.persistentVolumeClaimRetentionPolicy.whenScaled	Volume retention behavior when the replica count of the StatefulSet is reduced	Retain
readReplicas.persistentVolumeClaimRetentionPolicy.whenDeleted	Volume retention behavior that applies when the StatefulSet is deleted	Retain

Backup parameters

Name	Description	Value
backup.enabled	Enable the logical dump of the database "regularly"	false
backup.cronjob.schedule	Set the cronjob parameter schedule	@daily
backup.cronjob.timeZone	Set the cronjob parameter timeZone	""
backup.cronjob.concurrencyPolicy	Set the cronjob parameter concurrencyPolicy	Allow
backup.cronjob.failedJobsHistoryLimit	Set the cronjob parameter failedJobsHistoryLimit	1
backup.cronjob.successfulJobsHistoryLimit	Set the cronjob parameter successfulJobsHistoryLimit	3
backup.cronjob.startingDeadlineSeconds	Set the cronjob parameter startingDeadlineSeconds	""
backup.cronjob.ttlSecondsAfterFinished	Set the cronjob parameter ttlSecondsAfterFinished	""
backup.cronjob.restartPolicy	Set the cronjob parameter restartPolicy	OnFailure
backup.cronjob.podSecurityContext.enabled	Enable PodSecurityContext for CronJob/Backup	true
backup.cronjob.podSecurityContext.fsGroupChangePolicy	Set filesystem group change policy	Always
backup.cronjob.podSecurityContext.sysctls	Set kernel settings using the sysctl interface	[]
backup.cronjob.podSecurityContext.supplementalGroups	Set filesystem extra groups	[]
backup.cronjob.podSecurityContext.fsGroup	Group ID for the CronJob	1001
backup.cronjob.containerSecurityContext.enabled	Enabled containers' Security Context	true
backup.cronjob.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
backup.cronjob.containerSecurityContext.runAsUser	Set containers' Security Context runAsUser	1001
backup.cronjob.containerSecurityContext.runAsGroup	Set containers' Security Context runAsGroup	1001
backup.cronjob.containerSecurityContext.runAsNonRoot	Set container's Security Context runAsNonRoot	true
backup.cronjob.containerSecurityContext.privileged	Set container's Security Context privileged	false
backup.cronjob.containerSecurityContext.readOnlyRootFilesystem	Set container's Security Context readOnlyRootFilesystem	true
backup.cronjob.containerSecurityContext.allowPrivilegeEscalation	Set container's Security Context allowPrivilegeEscalation	false
backup.cronjob.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
backup.cronjob.containerSecurityContext.seccompProfile.type	Set container's Security Context seccomp profile	RuntimeDefault
backup.cronjob.command	Set backup container's command to run	["/bin/sh","-c","pg_dumpall --clean --if-exists --load-via-partition-root --quote-all-identifiers --no-password --file=${PGDUMP_DIR}/pg_dumpall-$(date '+%Y-%m-%d-%H-%M').pgdump"]
backup.cronjob.labels	Set the cronjob labels	{}
backup.cronjob.annotations	Set the cronjob annotations	{}
backup.cronjob.nodeSelector	Node labels for PostgreSQL backup CronJob pod assignment	{}
backup.cronjob.tolerations	Tolerations for PostgreSQL backup CronJob pods assignment	[]
backup.cronjob.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if backup.cronjob.resources is set (backup.cronjob.resources is recommended for production).	nano
backup.cronjob.resources	Set container requests and limits for different resources like CPU or memory	{}
backup.cronjob.networkPolicy.enabled	Specifies whether a NetworkPolicy should be created	true
backup.cronjob.storage.enabled	Enable using a PersistentVolumeClaim as backup data volume	true
backup.cronjob.storage.existingClaim	Provide an existing PersistentVolumeClaim (only when architecture=standalone)	""
backup.cronjob.storage.resourcePolicy	Setting it to "keep" to avoid removing PVCs during a helm delete operation. Leaving it empty will delete PVCs after the chart deleted	""
backup.cronjob.storage.storageClass	PVC Storage Class for the backup data volume	""
backup.cronjob.storage.accessModes	PV Access Mode	["ReadWriteOnce"]
backup.cronjob.storage.size	PVC Storage Request for the backup data volume	8Gi
backup.cronjob.storage.annotations	PVC annotations	{}
backup.cronjob.storage.mountPath	Path to mount the volume at	/backup/pgdump
backup.cronjob.storage.subPath	Subdirectory of the volume to mount at	""
backup.cronjob.storage.volumeClaimTemplates.selector	A label query over volumes to consider for binding (e.g. when using local volumes)	{}
backup.cronjob.extraVolumeMounts	Optionally specify extra list of additional volumeMounts for the backup container	[]
backup.cronjob.extraVolumes	Optionally specify extra list of additional volumes for the backup container	[]

Volume Permissions parameters

Name	Description	Value
volumePermissions.enabled	Enable init container that changes the owner and group of the persistent volume	false
volumePermissions.image.registry	Init container volume-permissions image registry	REGISTRY_NAME
volumePermissions.image.repository	Init container volume-permissions image repository	REPOSITORY_NAME/os-shell
volumePermissions.image.digest	Init container volume-permissions image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag	""
volumePermissions.image.pullPolicy	Init container volume-permissions image pull policy	IfNotPresent
volumePermissions.image.pullSecrets	Init container volume-permissions image pull secrets	[]
volumePermissions.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production).	nano
volumePermissions.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
volumePermissions.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
volumePermissions.containerSecurityContext.runAsUser	User ID for the init container	0
volumePermissions.containerSecurityContext.runAsGroup	Group ID for the init container	0
volumePermissions.containerSecurityContext.runAsNonRoot	runAsNonRoot for the init container	false
volumePermissions.containerSecurityContext.seccompProfile.type	seccompProfile.type for the init container	RuntimeDefault

Other Parameters

Name	Description	Value
serviceBindings.enabled	Create secret for service binding (Experimental)	false
serviceAccount.create	Enable creation of ServiceAccount for PostgreSQL pod	true
serviceAccount.name	The name of the ServiceAccount to use.	""
serviceAccount.automountServiceAccountToken	Allows auto mount of ServiceAccountToken on the serviceAccount created	false
serviceAccount.annotations	Additional custom annotations for the ServiceAccount	{}
rbac.create	Create Role and RoleBinding (required for PSP to work)	false
rbac.rules	Custom RBAC rules to set	[]
psp.create	Whether to create a PodSecurityPolicy. WARNING: PodSecurityPolicy is deprecated in Kubernetes v1.21 or later, unavailable in v1.25 or later	false

Metrics Parameters

Name	Description	Value
metrics.enabled	Start a prometheus exporter	false
metrics.image.registry	PostgreSQL Prometheus Exporter image registry	REGISTRY_NAME
metrics.image.repository	PostgreSQL Prometheus Exporter image repository	REPOSITORY_NAME/postgres-exporter
metrics.image.digest	PostgreSQL image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag	""
metrics.image.pullPolicy	PostgreSQL Prometheus Exporter image pull policy	IfNotPresent
metrics.image.pullSecrets	Specify image pull secrets	[]
metrics.collectors	Control enabled collectors	{}
metrics.customMetrics	Define additional custom metrics	{}
metrics.extraEnvVars	Extra environment variables to add to PostgreSQL Prometheus exporter	[]
metrics.containerSecurityContext.enabled	Enabled containers' Security Context	true
metrics.containerSecurityContext.seLinuxOptions	Set SELinux options in container	{}
metrics.containerSecurityContext.runAsUser	Set containers' Security Context runAsUser	1001
metrics.containerSecurityContext.runAsGroup	Set containers' Security Context runAsGroup	1001
metrics.containerSecurityContext.runAsNonRoot	Set container's Security Context runAsNonRoot	true
metrics.containerSecurityContext.privileged	Set container's Security Context privileged	false
metrics.containerSecurityContext.readOnlyRootFilesystem	Set container's Security Context readOnlyRootFilesystem	true
metrics.containerSecurityContext.allowPrivilegeEscalation	Set container's Security Context allowPrivilegeEscalation	false
metrics.containerSecurityContext.capabilities.drop	List of capabilities to be dropped	["ALL"]
metrics.containerSecurityContext.seccompProfile.type	Set container's Security Context seccomp profile	RuntimeDefault
metrics.livenessProbe.enabled	Enable livenessProbe on PostgreSQL Prometheus exporter containers	true
metrics.livenessProbe.initialDelaySeconds	Initial delay seconds for livenessProbe	5
metrics.livenessProbe.periodSeconds	Period seconds for livenessProbe	10
metrics.livenessProbe.timeoutSeconds	Timeout seconds for livenessProbe	5
metrics.livenessProbe.failureThreshold	Failure threshold for livenessProbe	6
metrics.livenessProbe.successThreshold	Success threshold for livenessProbe	1
metrics.readinessProbe.enabled	Enable readinessProbe on PostgreSQL Prometheus exporter containers	true
metrics.readinessProbe.initialDelaySeconds	Initial delay seconds for readinessProbe	5
metrics.readinessProbe.periodSeconds	Period seconds for readinessProbe	10
metrics.readinessProbe.timeoutSeconds	Timeout seconds for readinessProbe	5
metrics.readinessProbe.failureThreshold	Failure threshold for readinessProbe	6
metrics.readinessProbe.successThreshold	Success threshold for readinessProbe	1
metrics.startupProbe.enabled	Enable startupProbe on PostgreSQL Prometheus exporter containers	false
metrics.startupProbe.initialDelaySeconds	Initial delay seconds for startupProbe	10
metrics.startupProbe.periodSeconds	Period seconds for startupProbe	10
metrics.startupProbe.timeoutSeconds	Timeout seconds for startupProbe	1
metrics.startupProbe.failureThreshold	Failure threshold for startupProbe	15
metrics.startupProbe.successThreshold	Success threshold for startupProbe	1
metrics.customLivenessProbe	Custom livenessProbe that overrides the default one	{}
metrics.customReadinessProbe	Custom readinessProbe that overrides the default one	{}
metrics.customStartupProbe	Custom startupProbe that overrides the default one	{}
metrics.containerPorts.metrics	PostgreSQL Prometheus exporter metrics container port	9187
metrics.resourcesPreset	Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if metrics.resources is set (metrics.resources is recommended for production).	nano
metrics.resources	Set container requests and limits for different resources like CPU or memory (essential for production workloads)	{}
metrics.service.ports.metrics	PostgreSQL Prometheus Exporter service port	9187
metrics.service.clusterIP	Static clusterIP or None for headless services	""
metrics.service.sessionAffinity	Control where client requests go, to the same pod or round-robin	None
metrics.service.annotations	Annotations for Prometheus to auto-discover the metrics endpoint	{}
metrics.serviceMonitor.enabled	Create ServiceMonitor Resource for scraping metrics using Prometheus Operator	false
metrics.serviceMonitor.namespace	Namespace for the ServiceMonitor Resource (defaults to the Release Namespace)	""
metrics.serviceMonitor.interval	Interval at which metrics should be scraped.	""
metrics.serviceMonitor.scrapeTimeout	Timeout after which the scrape is ended	""
metrics.serviceMonitor.labels	Additional labels that can be used so ServiceMonitor will be discovered by Prometheus	{}
metrics.serviceMonitor.selector	Prometheus instance selector labels	{}
metrics.serviceMonitor.relabelings	RelabelConfigs to apply to samples before scraping	[]
metrics.serviceMonitor.metricRelabelings	MetricRelabelConfigs to apply to samples before ingestion	[]
metrics.serviceMonitor.honorLabels	Specify honorLabels parameter to add the scrape endpoint	false
metrics.serviceMonitor.jobLabel	The name of the label on the target service to use as the job name in prometheus.	""
metrics.prometheusRule.enabled	Create a PrometheusRule for Prometheus Operator	false
metrics.prometheusRule.namespace	Namespace for the PrometheusRule Resource (defaults to the Release Namespace)	""
metrics.prometheusRule.labels	Additional labels that can be used so PrometheusRule will be discovered by Prometheus	{}
metrics.prometheusRule.rules	PrometheusRule definitions	[]

Specify each parameter using the --set key=value[,key=value] argument to helm install. For example,

helm install my-release \
    --set auth.postgresPassword=secretpassword
    oci://REGISTRY_NAME/REPOSITORY_NAME/postgresql

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts.

The above command sets the PostgreSQL postgres account password to secretpassword.

NOTE: Once this chart is deployed, it is not possible to change the application's access credentials, such as usernames or passwords, using Helm. To change these application credentials after deployment, delete any persistent volumes (PVs) used by the chart and re-deploy it, or use the application's built-in administrative tools if available. Warning Setting a password will be ignored on new installation in case when previous PostgreSQL release was deleted through the helm command. In that case, old PVC will have an old password, and setting it through helm won't take effect. Deleting persistent volumes (PVs) will solve the issue. Refer to issue 2061 for more details

Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,

helm install my-release -f values.yaml oci://REGISTRY_NAME/REPOSITORY_NAME/postgresql

Note: You need to substitute the placeholders REGISTRY_NAME and REPOSITORY_NAME with a reference to your Helm chart registry and repository. For example, in the case of Bitnami, you need to use REGISTRY_NAME=registry-1.docker.io and REPOSITORY_NAME=bitnamicharts. Tip: You can use the default values.yaml

Troubleshooting

Find more information about how to deal with common errors related to Bitnami's Helm charts in this troubleshooting guide.

Upgrading

To 15.0.0

This major bump changes the following security defaults:

• runAsGroup is changed from 0 to 1001
• readOnlyRootFilesystem is set to true
• resourcesPreset is changed from none to the minimum size working in our test suites (NOTE: resourcesPreset is not meant for production usage, but resources adapted to your use case).
• global.compatibility.openshift.adaptSecurityContext is changed from disabled to auto.

This could potentially break any customization or init scripts used in your deployment. If this is the case, change the default values to the previous ones.

To 14.0.0

This major version adapts the NetworkPolicy objects to the most recent Bitnami standards. Now there is a separate object for primary and for readReplicas, being located in their corresponding sections. It is also enabled by default in other to comply with the best security standards.

Check the parameter section for the new value structure.

To 13.0.0

This major version changes the default PostgreSQL image from 15.x to 16.x. Follow the official instructions to upgrade to 16.x.

To 12.0.0

This major version changes the default PostgreSQL image from 14.x to 15.x. Follow the official instructions to upgrade to 15.x.

To 11.0.0

In this version the application version was bumped to 14.x series. Also, this major release renames several values in this chart and adds missing features, in order to be inline with the rest of assets in the Bitnami charts repository.

• replication.enabled parameter is deprecated in favor of architecture parameter that accepts two values: standalone and replication.
• replication.singleService and replication.uniqueServices parameters are deprecated. When using replication, each statefulset (primary and read-only) has its own headless service & service allowing to connect to read-only replicas through the service (round-robin) or individually.
• postgresqlPostgresPassword, postgresqlUsername, postgresqlPassword, postgresqlDatabase, replication.user, replication.password, and existingSecret parameters have been regrouped under the auth map. The auth map uses a new perspective to configure authentication, so please read carefully each sub-parameter description.
• extraEnv has been deprecated in favor of primary.extraEnvVars and readReplicas.extraEnvVars.
• postgresqlConfiguration, pgHbaConfiguration, configurationConfigMap, postgresqlExtendedConf, and extendedConfConfigMap have been deprecated in favor of primary.configuration, primary.pgHbaConfiguration, primary.existingConfigmap, primary.extendedConfiguration, and primary.existingExtendedConfigmap.
• postgresqlInitdbArgs, postgresqlInitdbWalDir, initdbScripts, initdbScriptsConfigMap, initdbScriptsSecret, initdbUser and initdbPassword have been regrouped under the primary.initdb map.
• postgresqlMaxConnections, postgresqlPostgresConnectionLimit, postgresqlDbUserConnectionLimit, postgresqlTcpKeepalivesInterval, postgresqlTcpKeepalivesIdle, postgresqlTcpKeepalivesCount, postgresqlStatementTimeout and postgresqlPghbaRemoveFilters parameters are deprecated. Use XXX.extraEnvVars instead.
• primaryAsStandBy has been deprecated in favor of primary.standby.
• securityContext and containerSecurityContext have been deprecated in favor of primary.podSecurityContext, primary.containerSecurityContext, readReplicas.podSecurityContext, and readReplicas.containerSecurityContext.
• livenessProbe and readinessProbe maps have been deprecated in favor of primary.livenessProbe, primary.readinessProbe, readReplicas.livenessProbe and readReplicas.readinessProbe maps.
• persistence map has been deprecated in favor of primary.persistence and readReplicas.persistence maps.
• networkPolicy map has been completely refactored.
• service map has been deprecated in favor of primary.service and readReplicas.service maps.
• metrics.service.port has been regrouped under the metrics.service.ports map.
• serviceAccount.enabled and serviceAccount.autoMount have been deprecated in favor of serviceAccount.create and serviceAccount.automountServiceAccountToken.

How to upgrade to version 11.0.0

To upgrade to 11.0.0 from 10.x, it should be done reusing the PVC(s) used to hold the PostgreSQL data on your previous release. To do so, follow the instructions below (the following example assumes that the release name is postgresql):

NOTE: Please, create a backup of your database before running any of these actions.

1. Obtain the credentials and the names of the PVCs used to hold the PostgreSQL data on your current release:

export POSTGRESQL_PASSWORD=$(kubectl get secret --namespace default postgresql -o jsonpath="{.data.postgresql-password}" | base64 --decode)
export POSTGRESQL_PVC=$(kubectl get pvc -l app.kubernetes.io/instance=postgresql,role=primary -o jsonpath="{.items[0].metadata.name}")

1. Delete the PostgreSQL statefulset (notice the option --cascade=false) and secret:

kubectl delete statefulsets.apps postgresql-postgresql --namespace default --cascade=false
kubectl delete secret postgresql --namespace default

1. Upgrade your release using the same PostgreSQL version:

CURRENT_VERSION=$(kubectl exec postgresql-postgresql-0 -- bash -c 'echo $BITNAMI_IMAGE_VERSION')
helm upgrade postgresql bitnami/postgresql \
  --set auth.postgresPassword=$POSTGRESQL_PASSWORD \
  --set primary.persistence.existingClaim=$POSTGRESQL_PVC \
  --set image.tag=$CURRENT_VERSION

1. You will have to delete the existing PostgreSQL pod and the new statefulset is going to create a new one

kubectl delete pod postgresql-postgresql-0

1. Finally, you should see the lines below in PostgreSQL container logs:

$ kubectl logs $(kubectl get pods -l app.kubernetes.io/instance=postgresql,app.kubernetes.io/name=postgresql,app.kubernetes.io/component=primary -o jsonpath="{.items[0].metadata.name}")
...
postgresql 08:05:12.59 INFO  ==> Deploying PostgreSQL with persisted data...
...

NOTE: the instructions above reuse the same PostgreSQL version you were using in your chart release. Otherwise, you will find an error such as the one below when upgrading since the new chart major version also bumps the application version. To workaround this issue you need to upgrade database, please refer to the official PostgreSQL documentation for more information about this.

$ kubectl logs $(kubectl get pods -l app.kubernetes.io/instance=postgresql,app.kubernetes.io/name=postgresql,app.kubernetes.io/component=primary -o jsonpath="{.items[0].metadata.name}")
    ...
postgresql 08:10:14.72 INFO  ==> ** Starting PostgreSQL **
2022-02-01 08:10:14.734 GMT [1] FATAL:  database files are incompatible with server
2022-02-01 08:10:14.734 GMT [1] DETAIL:  The data directory was initialized by PostgreSQL version 11, which is not compatible with this version 14.1.

To 10.0.0

On November 13, 2020, Helm v2 support was formally finished, this major version is the result of the required changes applied to the Helm Chart to be able to incorporate the different features added in Helm v3 and to be consistent with the Helm project itself regarding the Helm v2 EOL.

• Previous versions of this Helm Chart use apiVersion: v1 (installable by both Helm 2 and 3), this Helm Chart was updated to apiVersion: v2 (installable by Helm 3 only). Here you can find more information about the apiVersion field.
• Move dependency information from the requirements.yaml to the Chart.yaml
• After running helm dependency update, a Chart.lock file is generated containing the same structure used in the previous requirements.lock
• The different fields present in the Chart.yaml file has been ordered alphabetically in a homogeneous way for all the Bitnami Helm Chart.
• The term master has been replaced with primary and slave with readReplicas throughout the chart. Role names have changed from master and slave to primary and read.

Considerations when upgrading to this version

• If you want to upgrade to this version using Helm v2, this scenario is not supported as this version does not support Helm v2 anymore.
• If you installed the previous version with Helm v2 and wants to upgrade to this version with Helm v3, please refer to the official Helm documentation about migrating from Helm v2 to v3.

Useful links

• Bitnami Tutorial
• Helm docs
• Helm Blog

How to upgrade to version 10.0.0

To upgrade to 10.0.0 from 9.x, it should be done reusing the PVC(s) used to hold the PostgreSQL data on your previous release. To do so, follow the instructions below (the following example assumes that the release name is postgresql):

NOTE: Please, create a backup of your database before running any of those actions.

1. Obtain the credentials and the names of the PVCs used to hold the PostgreSQL data on your current release:

export POSTGRESQL_PASSWORD=$(kubectl get secret --namespace default postgresql -o jsonpath="{.data.postgresql-password}" | base64 --decode)
export POSTGRESQL_PVC=$(kubectl get pvc -l app.kubernetes.io/instance=postgresql,role=primary -o jsonpath="{.items[0].metadata.name}")

1. Delete the PostgreSQL statefulset (notice the option --cascade=false):

kubectl delete statefulsets.apps postgresql-postgresql --namespace default --cascade=false

1. Upgrade your release using the same PostgreSQL version:

helm upgrade postgresql bitnami/postgresql \
  --set postgresqlPassword=$POSTGRESQL_PASSWORD \
  --set persistence.existingClaim=$POSTGRESQL_PVC

1. Delete the existing PostgreSQL pod and the new statefulset will create a new one:

kubectl delete pod postgresql-postgresql-0

1. Finally, you should see the lines below in PostgreSQL container logs:

$ kubectl logs $(kubectl get pods -l app.kubernetes.io/instance=postgresql,app.kubernetes.io/name=postgresql,role=primary -o jsonpath="{.items[0].metadata.name}")
...
postgresql 08:05:12.59 INFO  ==> Deploying PostgreSQL with persisted data...
...

To 9.0.0

In this version the chart was adapted to follow the Helm standard labels.

• Some inmutable objects were modified to adopt Helm standard labels introducing backward incompatibilities.

How to upgrade to version 9.0.0

To upgrade to 9.0.0 from 8.x, it should be done reusing the PVC(s) used to hold the PostgreSQL data on your previous release. To do so, follow the instructions below (the following example assumes that the release name is postgresql):

NOTE: Please, create a backup of your database before running any of those actions.

1. Obtain the credentials and the names of the PVCs used to hold the PostgreSQL data on your current release:

export POSTGRESQL_PASSWORD=$(kubectl get secret --namespace default postgresql -o jsonpath="{.data.postgresql-password}" | base64 --decode)
export POSTGRESQL_PVC=$(kubectl get pvc -l app=postgresql,role=master -o jsonpath="{.items[0].metadata.name}")

1. Delete the PostgreSQL statefulset (notice the option --cascade=false):

kubectl delete statefulsets.apps postgresql-postgresql --namespace default --cascade=false

1. Upgrade your release using the same PostgreSQL version:

helm upgrade postgresql bitnami/postgresql \
  --set postgresqlPassword=$POSTGRESQL_PASSWORD \
  --set persistence.existingClaim=$POSTGRESQL_PVC

1. Delete the existing PostgreSQL pod and the new statefulset will create a new one:

kubectl delete pod postgresql-postgresql-0

1. Finally, you should see the lines below in PostgreSQL container logs:

$ kubectl logs $(kubectl get pods -l app.kubernetes.io/instance=postgresql,app.kubernetes.io/name=postgresql,role=master -o jsonpath="{.items[0].metadata.name}")
...
postgresql 08:05:12.59 INFO  ==> Deploying PostgreSQL with persisted data...
...

License

Copyright © 2024 Broadcom. The term "Broadcom" refers to Broadcom Inc. and/or its subsidiaries.

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.