paulxstretch/deps/juce/modules/juce_box2d/box2d/Dynamics/Joints/b2MouseJoint.h

127 lines
3.6 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006-2007 Erin Catto http://www.box2d.org
*
* This software is provided 'as-is', without any express or implied
* warranty. In no event will the authors be held liable for any damages
* arising from the use of this software.
* Permission is granted to anyone to use this software for any purpose,
* including commercial applications, and to alter it and redistribute it
* freely, subject to the following restrictions:
* 1. The origin of this software must not be misrepresented; you must not
* claim that you wrote the original software. If you use this software
* in a product, an acknowledgment in the product documentation would be
* appreciated but is not required.
* 2. Altered source versions must be plainly marked as such, and must not be
* misrepresented as being the original software.
* 3. This notice may not be removed or altered from any source distribution.
*/
#ifndef B2_MOUSE_JOINT_H
#define B2_MOUSE_JOINT_H
#include "b2Joint.h"
/// Mouse joint definition. This requires a world target point,
/// tuning parameters, and the time step.
struct b2MouseJointDef : public b2JointDef
{
b2MouseJointDef()
{
type = e_mouseJoint;
target.Set(0.0f, 0.0f);
maxForce = 0.0f;
frequencyHz = 5.0f;
dampingRatio = 0.7f;
}
/// The initial world target point. This is assumed
/// to coincide with the body anchor initially.
b2Vec2 target;
/// The maximum constraint force that can be exerted
/// to move the candidate body. Usually you will express
/// as some multiple of the weight (multiplier * mass * gravity).
float32 maxForce;
/// The response speed.
float32 frequencyHz;
/// The damping ratio. 0 = no damping, 1 = critical damping.
float32 dampingRatio;
};
/// A mouse joint is used to make a point on a body track a
/// specified world point. This a soft constraint with a maximum
/// force. This allows the constraint to stretch and without
/// applying huge forces.
/// NOTE: this joint is not documented in the manual because it was
/// developed to be used in the testbed. If you want to learn how to
/// use the mouse joint, look at the testbed.
class b2MouseJoint : public b2Joint
{
public:
/// Implements b2Joint.
b2Vec2 GetAnchorA() const;
/// Implements b2Joint.
b2Vec2 GetAnchorB() const;
/// Implements b2Joint.
b2Vec2 GetReactionForce(float32 inv_dt) const;
/// Implements b2Joint.
float32 GetReactionTorque(float32 inv_dt) const;
/// Use this to update the target point.
void SetTarget(const b2Vec2& target);
const b2Vec2& GetTarget() const;
/// Set/get the maximum force in Newtons.
void SetMaxForce(float32 force);
float32 GetMaxForce() const;
/// Set/get the frequency in Hertz.
void SetFrequency(float32 hz);
float32 GetFrequency() const;
/// Set/get the damping ratio (dimensionless).
void SetDampingRatio(float32 ratio);
float32 GetDampingRatio() const;
/// The mouse joint does not support dumping.
void Dump() { b2Log("Mouse joint dumping is not supported.\n"); }
protected:
friend class b2Joint;
b2MouseJoint(const b2MouseJointDef* def);
void InitVelocityConstraints(const b2SolverData& data);
void SolveVelocityConstraints(const b2SolverData& data);
bool SolvePositionConstraints(const b2SolverData& data);
b2Vec2 m_localAnchorB;
b2Vec2 m_targetA;
float32 m_frequencyHz;
float32 m_dampingRatio;
float32 m_beta;
// Solver shared
b2Vec2 m_impulse;
float32 m_maxForce;
float32 m_gamma;
// Solver temp
juce::int32 m_indexA;
juce::int32 m_indexB;
b2Vec2 m_rB;
b2Vec2 m_localCenterB;
float32 m_invMassB;
float32 m_invIB;
b2Mat22 m_mass;
b2Vec2 m_C;
};
#endif